NAMES AND
FUNCTIONS
28
BASIC
CONNECTIONS
BASIC
OPERA
TION
ADV
ANCED
CONNECTIONS
SETUP
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
OTHERS
OTHERS
CAUTION
NOTE for DTS signal
* Connected DVD player, Blu-ray disc player or CD
player needs to support DTS digital output. You
may not be able to play some DTS source signals
from certain CD players and Blu-ray disc players
even if you connect the player to this unit digitally.
This is because the digital signal has been
processed (such as the output level, sampling
frequency or frequency response), and this unit
cannot recognize the signal as DTS data.
* Depending on the player used, DTS play may
produce a short noise. This is not a malfunction.
* While signals from a DTS Blu-ray disc or CD are
playing in another surround mode, you cannot
switch to digital input or from digital input to
analog input by pressing the A/D button.
* The outputs for VCR OUT, TAPE OUT, output
analog audio signals only. Do not record from CDs
or BDs that support DTS using these outputs. If
you do, the DTS-encoded signal will be recorded
as noise.
DESCRIPTION
Manufactured under license under U.S. Patent
No’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents
issued & pending. DTS and DTS Digital Surround
are registered trademarks and the DTS logos and
Symbol are trademarks of DTS, Inc. © 1996-2008
DTS, Inc. All Rights Reserved.
dts Digital Surround
DTS was introduced in 1994 to provide 5.1 channels
of discrete digital audio into home theater systems.
DTS brings you premium quality discrete multichannel
digital sound to both movies and music.
DTS is a multichannel sound system designed to
create full range digital sound reproduction.
The no compromise DTS digital process sets the
standard of quality for cinema sound by delivering
an exact copy of the studio master recordings to
neighborhood and home theaters.
Now, every moviegoer can hear the sound exactly
as the moviemaker intended.
DTS can be enjoyed in the home for either movies
or music on of DVD’s, Blu-ray disc’s, and CD’s.
Dolby Digital identifi es the use of Dolby Digital audio
coding for such consumer formats as DVD and
DTV. As with fi lm sound, Dolby Digital can provide
up to fi ve full-range channels for left, center, and
right screen channels, independent left and right
surround channels, and a sixth (“.1”) channel for
low-frequency effects.
Dolby Surround Pro Logic
II
is an improved matrix
decoding technology that provides better spatiality
and directionality on Dolby Surround program
material; provides a convincing three-dimensional
soundfi eld on conventional stereo music recordings;
and is ideally suited to bring the surround experience
to automotive sound. While conventional surround
programming is fully compatible with Dolby Surround
Pro Logic II decoders, soundtracks will be able to be
encoded specifi cally to take full advantage of Pro
Logic II playback, including separate left and right
surround channels. (Such material is also compatible
with conventional Pro Logic decoders.)
Dolby Virtual Speaker is a technologycertified
by Dolby Laboratories that creates a virtualized
surround sound experience from two speakers using
a multichannel Dolby Digital source. Additionally,
Dolby Virtual Speaker can simulate the surround
sound effect produced by Dolby Pro Logic or Dolby
Pro Logic II.
Dolby Virtual Speaker retains all the original
Multichannel audio information and provides the
listener with the sensation of being surrounded by
additional speakers.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories.
HDMI, the
and High-Defi nition Multimedia
Interface are trademarks or registered trademarks
of HDMI Licensing LLC.
FM TUNER SECTION
Frequency Range ........... 87.5 MHz to 108.0 MHz
Usable Sensitivity (IHF, 16.4 dBf) .............. 1.8 μV
Signal to Noise Ratio (Mono/Stereo)
............................................ 75 dB / 70 dB
Distortion (Mono/Stereo) ............... 0.2 % / 0.3 %
Stereo Separation ............................. 1 kHz 45 dB
Alternate Channel Selectivity ... ± 300 kHz 60 dB
Image Rejection ............................ 98 MHz 70 dB
Tuner Output Level (1 kHz, ± 40 kHz Dev)
......................................................500
mV
AM TUNER SECTION
Frequency Range ................ 522 kHz to 1620 kHz
Signal to Noise Ratio .................................. 50 dB
Usable Sensitivity (Loop Antenna) ......400 μV/m
Distortion ..................... 400 Hz, 30 % Mod. 0.5 %
Selectivity ..................................... ± 18 kHz 70 dB
AUDIO SECTION
Power Output
...5 ch
×
170 W at 6 ohm, 1kHz, 1 ch driven (JEITA)
Power Output (20 Hz – 20 kHz/THD=0.08%)
Front L&R (8 ohm load, Per channel) .. 80 W
Center (8 ohm load, Per channel) ........ 80 W
Surround L&R (8 ohm load, Per channel)
.......................................................... 80
W
Input Sensitivity/Impedance ...... 180 mV / 47 k
Ω
Signal to Noise Ratio (Analog Input / Pure Direct)
....................................................... 100
dB
Frequency Response
(Analog Input / Pure Direct)
............................. 8 Hz to 80 kHz (± 3 dB)
(Digital Input / 96 kHz PCM)
............................. 8 Hz to 45 kHz (± 3 dB)
VIDEO
Television Format ............................... NTSC/PAL
Input Level/Impedance ...................1 Vp-p / 75
Ω
Output Level/Impedance ................1 Vp-p / 75
Ω
Video Frequency Response
.............................. 5 Hz to 8 MHz (- 1 dB)
Video Frequency (Component)
............................ 5 Hz to 80 MHz (- 1 dB)
S/N ............................................................. 60 dB
HDMI
Version ...................................... 1.3a [INPUT]
GENERAL
Power Requirement ........AC 230 V 50 Hz / 60 Hz
Power Consumption ................................. 250 W
Standby Power Consumption ....(Normal) 0.5 W
SPECIFICATIONS
SR3053̲S̲01̲ENG.indd 28
SR3053̲S̲01̲ENG.indd 28
09.4.21 11:46:58 AM
09.4.21 11:46:58 AM
