Marani LPP-360A, User Manual

Page: 8 / 40


Menu “UTILITY” [access by pushing the “UTILITY” button]
From the “Default Screen”, it is possible access the “UTILITY” menu pushing the “UTILITY” button
and the Sub-Menus pages can be selected just rotating clockwise and counter-clockwise the
“PM1” encoder.
Once selected the sub-menu page, using the “ENTER” button can be accessed the Sub-Menus
pages, again “scrollable” using the “PM1” encoder and accessible for the parameters' editing
pushing again the “ENTER' button.
Note: In each sub-menu choice, the current selected or running choice is what shown on the LCD
screen.
System Utilities Sub-menu – this sub-menu allows to access several operations related to the
LPP-360A Start Up and General Configuration:
UTILITY MENU:
From the “System Utilities Sub-menu”, pushing “ENTER” and then using the “PM1” encoder for
scrolling will give access to the following pages:

Input Source: the LPP-360A is equipped with 4 Analog Inputs (Balanced Female XLR) and 2
AES Digital Input (RCA connector).and noise generator
The “Input Source” page allows you to select the desired Input type:
By pressing ENTER on Input Source and then rotating the “PM2” or “PM3” encoders, it is
possible to select the Main Inputs for the LPP-360A, allowing the User to choose between
Analog , AES Digital Input or Noise Generator.
The selection can be confirmed by pressing the “ENTER” button.
The following screen shows that the Analog Input has been selected:
UTILITY MENU
-- System Utilities --
SYSTEM UTILITY
-- Input Source --
Input Source
Source = Analog input