By using “PM2” encoder, user can set the gain of current parametric equalization filter from -15dB
to +15dB, and by using “PM3” encoder, it is possible to set the Q factor of current parametric
equalization filter from 0.1 to 5.1.
When the parametric equalization filter is selected as Low-Pass 1/ Low-Pass 2/ High-Pass 1/ High-
Pass 2, by rotaing “PM1” encoder, user can enter the setting interface 8 of current input
parametric equalization filter:
By using “PM2” or “PM3” encoder, it is possible to set current input PEQ filter’s frequency from the
range of 20Hz to 20kHz.
When the parametric equalization filter is selected as Low-Pass Q/ High-Pass Q, by rotaing “PM1”
encoder, user can enter the setting interface 9 of current input parametric equalization filter:
By using “PM2” or “PM3” encoder, it is possible to set current input PEQ filter’s frequency from the
range of 20Hz to 20kHz.
By rotaing “PM1” encoder again, user can enter the setting interface 10 of current input
parametric equalization filter:
By using “PM2” or “PM3” encoder, it is possible to set the Q factor of current parametric
equalization filter from 0.1 to 5.1.
When the parametric equalization filter is selected as Band-Pass, by rotaing “PM1” encoder, user
can enter the setting interface 11 of current input parametric equalization filter:
By using “PM2” or “PM3” encoder, it is possible to set current input PEQ filter’s frequency from the
range of 20Hz to 20kHz.
By rotaing “PM1” encoder again, user can enter the setting interface 12 of current input
parametric equalization filter:
By using “PM2” encoder, user can set the gain of current parametric equalization filter from -15dB
to +15dB, and by using “PM3” encoder, it is possible to set the Q factor of current parametric
In-A In-A PEQ-01
->Frequency = 20Hz
In-A In-A PEQ-01
->Frequency = 20Hz
In-A In-A PEQ-01
->Gain=Fixed Q=0.1
In-A In-A PEQ-01
->Frequency = 20Hz
In-A In-A PEQ-01
->Gain=0.0dB Q=4
Summary of Contents for LPP-360A
Page 39: ......
