By using “PM2” or “PM3” encoder, user can set the gain of current parametric equalization filter
from -15dB to +15dB.
When the parametric equalization filter type is selected as Hi-Shelv Q/ Lo-Shelv Q, by rotaing
“PM1” encoder again, user can enter the setting interface 6 of current output parametric
equalization filter:
By using “PM2” or “PM3” encoder, it is possible to set current output PEQ filter’s frequency from
the range of 20Hz to 20kHz.
By rotaing “PM1” encoder again, user can enter the setting interface 7 of current input parametric
equalization filter:
By using “PM2” encoder, user can set the gain of current parametric equalization filter from -15dB
to +15dB, and by using “PM3” encoder, it is possible to set the Q factor of current parametric
equalization filter from 0.1 to 5.1.
When the parametric equalization filter type is selected as Low-Pass 1/ Low-Pass 2/ High-Pass 1/
High-Pass 2, by rotaing “PM1” encoder again, user can enter the setting interface 8 of current
output parametric equalization filter:
By using “PM2” or “PM3” encoder, it is possible to set current output PEQ filter’s frequency from
the range of 20Hz to 20kHz.
When the parametric equalization filter type is selected as Low-Pass Q/ High-Pass Q, by rotaing
“PM1” encoder again, user can enter the setting interface 9 of current output parametric
equalization filter:
By using “PM2” or “PM3” encoder, it is possible to set current output PEQ filter’s frequency from
the range of 20Hz to 20kHz.
By rotaing “PM1” encoder again, user can enter the setting interface 10 of current input
parametric equalization filter:
Out-1 Out 1 PEQ-01
->Frequency = 20Hz
Out-1 Out 1 PEQ-01
->Gain=0.0dB Q=0.1
Out-1 Out 1 PEQ-01
->Frequency = 20Hz
Out-1 Out 1 PEQ-01
->Frequency = 20Hz
Out-1 Out 1 PEQ-01
->Gain=Fixed Q=0.1
Summary of Contents for LPP-360A
Page 39: ......
