Marani LPP-360A, User Manual

Page: 14 / 40

For example, if we want to delete the preset 10, “Stage 1 2x2”, the screen will be the
following:
Confirming the deletion by pressing “ENTER” again, will force the LPP-360A to erase the
selected preset and the following transitory screen will appear:
Once the preset is deleted, the above screen will disappear returning to the following screen:
Note : At any time it is possible to quit the deleting action by pressing the “ESC” button.
Interface Utilities Sub-menu – this sub-menu allows you to define the remote control interface
[USB, RS485 or TCP/IP] to be used for controlling the LPP-360A:
From “Interface Utilities”, press “ENTER” button to access the Interface Setup.

Interface Setup: this screen allows you to choose the communication source for the LPP-
360A.
If select RS485, connect more than one unit under the RS485 mode. By using “PM3” encoder,
user can set the ID number from 1 to 32, to assign to the units connected, and confirm by
pressing “ENTER” button.
If select TCP/IP, select the DHCP status by using “PM3” encoder, with choice of “ON” or “OFF”.
Interface Setup
Source=USB
UTILITY MENU
-- Interface Utilities --
PROGRAM UTILITY
-- Delete a Program --
Erasing Xover Memory.....
10: Stage 1 2x2
[ENTER] to Delete.
10: Stage 1 2x2
Interface Setup
Source=RS485 ID=01