Marani LPP-360A, User Manual

Page: 29 / 40

BW -6 dB/Oct / BW -12 dB/Oct / LR -12 dB/Oct / BS -12 dB/Oct / BW -18 dB/Oct / BW -24
dB/Oct / LR -24 dB/Oct / BS -24 dB/Oct / BW -36 dB/Oct / LR-36 dB/Oct / BW -48 dB/Oct / LR-
48 dB/Oct /
LPF page – in this page, it is possible to set the Low-Pass filter of output channels:
By pressing ENTER in this page, an arrow will appear on the left of the screen “
-> ”, then enter
into the setting interface 1 of Low-Pass filter:
By using “PM2” or “PM3” encoder, it is possible to set output channels’ Low-Pass filter frequency
from 20Hz to 20kHz.
By rotating “PM1” encoder, it will enter setting interface 2 of Low-Pass filter:
By using “PM2” or “PM3” encoder, it is possible to set the Low-Pass filter’s shape and order of the
output Low-Pass filter. Following is the available shape and order of the Low-Pass filter:
Bypass/
BW -6 dB/Oct / BW -12 dB/Oct / LR -12 dB/Oct / BS -12 dB/Oct / BW -18 dB/Oct / BW -24
dB/Oct / LR -24 dB/Oct / BS -24 dB/Oct / BW -36 dB/Oct / LR-36 dB/Oct / BW -48 dB/Oct / LR-
48 dB/Oct /
EQ Byp page – in this page, it is possible to set EQ Bypass of output channels, with its selectable
status of “ON” and “OFF”. Following is the example screen as Bypass ON:
By pressing ENTER in this page, an arrow will appear on the left of the screen “ -> ”, then enter
setting interface of EQ Bypass:
By using “PM2” or “PM3” encoder, user can set the EQ Bypass as “ON” or “OFF”.
PEQ-[xx] (01to07) page – In this page, it is possible to set 11 available parametric equalization
filters for output channels, with each parametric equalization filters can be selected as BELL,
Shevling, High-Pass, Low-Pass, Band-Pass, Notch filter and All Pass Filter.
Out-1 Out 1 LPF
F= 20Hz Bypass
Out-1 Out 1 LPF
->Frequency = 20Hz
Out-1 Out 1 LPF
->Slope = Bypass
Out-1 Out 1 EQ Byp
Bypass = On
Out-1 Out 1 EQ Byp
->Bypass=On
Out-1 Out 1 PEQ-01
Byp=Off Type=Peaking_Eq