Certificate Number: 255416-2516776 Project Number: 2516776 Page Number:74
INSTALLATION AND OPERATION MANUAL
MARANA FORNI srl unipersonale
via Turbina 98 37139 Chievo-Verona-Italia
tel. +39 045 6704503 - fax +39 045 7156118
www.maranaforni.it - [email protected]
Skype: maranaforni
VER
2.1
© Riproduzione vietata
PAG
4 / 27
INSTALLATION CLEARANCES
WARNING
: Improper installation, adjustment, alteration, service or maintenance can cause property
damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before
installing or servicing this equipment. Contact your local building or fire officials about restrictions and
installation inspection in your area.
IT IS ABSOLUTELY IMPORTANT TO MAINTAIN CLEARANCE SPACE BETWEEN THE OVEN AND ANY
COMBUSTIBLE MATERIAL (WALLS AND/OR CEILINGS), TO AVOID RESULT IN FIRE.
DO NOT PACK REQUIRED CLEARANCE (AIR SPACE) WITH INSULATION OR OTHER MATERIALS.
WHEN NON-COMBUSTIBLE BUILDING MATERIALS CONTACT OVEN COVERING THE CLEARANCES
TO COMBUSTIBLES ARE TRANSFERRED TO THOSE NON-COMBUSTIBLES.
TO REDUCE RISK OF FIRE, FOLLOW THESE INSTALLATION INSTRUCTIONS.
OVEN MUST BE INSULATED AND COVERED WITH NON-COMBUSTIBLE MATERIALS OR WITH A
NON-COMBUSTIBLE FACADE
Consider your insulation material (standard dry-wall or sheet rock) as a combustible.
Servicing of this products could expose you to non-safety dust:
ALWAYS WEAR RESPIRATORY AND EYE PROTECTION
Tiled materials must conform local codes or in the absence of local codes, with the National Fuel Gas Code,
ANSI Z223.1/NFPA 54, or the Natural Gas and Propane Installation Code, CSA B149.1, as applicable.
