MARANA Forni ROTOFORNO CLASSICO MF110 DXCT Installation And Operation Manual Download Page 14

 

 
 

Certificate Number: 255416-2516776 Project Number: 2516776 Page Number:74

  

INSTALLATION AND OPERATION MANUAL

 

 

 

 
 
MARANA FORNI srl unipersonale 
via Turbina 98    37139 Chievo-Verona-Italia 
tel. +39 045 6704503 - fax +39 045 7156118 
www.maranaforni.it -
 [email protected] 

 

Skype: maranaforni 

 

 
 

VER 

2.1 

© Riproduzione vietata 

PAG 

14 / 27 

 

 

 
 
 

1

TO SWITCH ON / OFF 

With  the  green  light  indicating  that  the  electricity  supply  is  connected  (lightning),  press  the 

ON/OFF button 

for a moment; the display will light up indicating, after about ten seconds, the 

temperature reading inside the oven (red light above the thermometer will be on); the rotation 

speed of the plate will be that of “oven standby”.

 

To switch off the console, press the 

ON/OFF

 button for a few seconds until it switches off.

  

Use the 

“EMERGENCY”

 button only in case of necessity.  

 

2. BASE LEVEL COOKING 

Move  the  joystick  down  for  a  moment  (towards  the  lit  dot  above  the  “clock”  symbol);  the 

rotation speed of the plate will change to the optimal speed for cooking; the display will show 
the  cooking  time  remaining,  with  time  being  counted  down;  ten  seconds  before  cooking  is 

finished, there will be a short warning sound indicating “cooking almost finished” and at the end 

there will be three short sounds. 

 

3. COOKING WITH THE PLATE AT THE 1

ST

 LEVEL 

Move the joystick lever to the left for a moment; the plate will rise to the first level and cooking 

will  take  place  as  for  the  “BASE  LEVEL  COOKING”.  When  cooking  is  finished,  the  plate  will 

descend  to  the  base  level.  For  safety,  the  command  will  be  refused  if  the  temperature 
registered inside the oven is less than 150°C. 

 

4. COOKING WITH THE PLATE AT THE 2

ND

 LEVEL 

Move the joystick lever to the right for a moment. Everything will function as for cooking at the 
1

st

 level, but obviously at a higher level. When cooking is finished, the plate will descend to the 

base  level.  For  safety,  the  command  will  be  refused  if  the  temperature  registered  inside  the 
oven is less than 150°C.  

 

5. TO PRE-HEAT THE PLATE 

Move the joystick lever upwards for a moment; the plate will rise to the maximum height, and 
rotation speed will be that during cooking, and for a pre-set time, at the end of which the plate 
will descent to the base level. 
For  safety,  the  command  will  be  refused  in  the  temperature  registered  inside  the  oven  is  less 
than 150°C. 

 

6. TO IMMEDIATELY HALT COOKING IN PROGRESS 

For  all  cooking  methods  or  pre-heating  the  plate,  keep  the  joystick  pressed  downwards  for  a 
couple of seconds. Cooking or pre-heating will stop immediately, and the plate will descend to 
the base (function RESET). 
 

7. TO STOP ROTATION OF THE PLATE 

Press  the  ON/OFF  button  for  a  moment;  the  plate  will  slow  down  and  then  stop.  Pressing  the 
button again in the same way will cause the rotation to return to the normal speed again. 

 

Summary of Contents for ROTOFORNO CLASSICO MF110 DXCT




























Reviews: