Certificate Number: 255416-2516776 Project Number: 2516776 Page Number:74
INSTALLATION AND OPERATION MANUAL
MARANA FORNI srl unipersonale
via Turbina 98 37139 Chievo-Verona-Italia
tel. +39 045 6704503 - fax +39 045 7156118
www.maranaforni.it - [email protected]
Skype: maranaforni
VER
2.1
© Riproduzione vietata
PAG
23 / 27
I.
CUSTOMISING THE FLAME STRENGTH
The Baking Burner has five flame positions, and each one can be calibrated to five
levels (the customised strength of the flame).
With the burner lit in manual mode, and with the green LED on, select the flame you
wish to change/customise using the
buttons. Hold down the COGS/LIGHT
button
(8) for more than 3 seconds, until LED (7) begins to flash. Choose the flame
level of your choice with the
buttons (minimum 1, maximum 5) to control the
flame strength. To confirm the change made, either hold down the COGS/LIGHT
button
(8) again for three seconds or wait 10 seconds for automatic confirmation.
J.
OPERATING THE MINIMUM FLAME/FULLY SHUTTING DOWN THE BAKING BURNER
Automatic mode
: Once the oven reaches the programmed temperature there are
two options: One, the burner remains in the minimum position (maintenance) or two,
the burner switches off completely.
With the
full shutdown
feature, if the temperature inside the oven is 5°C above the
programmed temperature, the Baking Burner will turn off completely. The burner will
light again automatically when the temperature is 1°C below the programmed
temperature.
If a new bake begins with the operating lever, the burner will light again, even though
it is in full shutdown mode.
With the
minimum flame
feature, if the oven temperature is 5°C above the
programmed temperature, the flame will gradually reduce until it reaches the
minimum setting; once it has reached this temperature, the flame can be adjusted to
maintain the desired temperature.
Change the setting in use.
With the burner lit in manual mode and the green LED on (12), light the Baking Burner
and then hold down the COGS/LIGHT button
(8) for 3 seconds, until the LED (7)
starts to flash. Hold down the ON/OFF
until you hear a continuous sound.
Checking the programme version
With the unit
in “OFF” mode (the yellow LED from the “MASTER IGNITION” with a
flashing light), briefly press the
ON
Baking Burner button: one of the yellow LEDs
(from 1 to 5) will flash. You must count a maximum of 9 flashes. Should the technical
support service enquire, you must indicate which LED is on and the number of times it
flashes (this can range from the first version 1.1 to the latest 5.9). The first version will light
up LED number 1 (version 1.1).
