Manufacture Corporation 94-1518PF, User Manual

Page: 232 / 280

223
13-4.2 Static Table
The section describes to configure the Static IP Source Guard Table parameters of the switch.
You could use the Static IP Source Guard Table configure to manage the entries.
Web Interface
To configure a Static IP Source Guard Table Configuration in the web interface:
1. Click Security, IP Source Guard and Static Table.
2. Click “Add New Entry”.
3. Specify the Port, IP Address, and MAC address in the entry.
4. Click Apply.
Figure 13-4.2: The Static IP Source Guard Table
Parameter description:

Port :
The logical port for the settings.

IP Address :
Allowed Source IP address.

MAC address :
Allowed Source MAC address.
Buttons

Add New Entry :
Click to add a new entry to the Static IP Source Guard table. Specify the Port, VLAN ID, IP
address, and IP Mask for the new entry. Click "Apply".

Delete :
Check to delete the entry. It will be deleted during the next save.

Apply :
Click to save changes.

Reset :
Click to undo any changes made locally and revert to previously saved values.