42
Chapter 4
Port Management
The section describes to configure the Port detail parameters of the switch. Others you could
use the Port configure to enable or disable the Port of the switch. Monitor the ports content or
status in the function.
4-1 Port Configuration
This page displays current port configurations. Ports can also be configured here.
Web Interface
To configure a Current Port Configuration in the web interface:
1.
Click Port Management and Port Configuration.
2.
Specify the Speed Configured, Flow Control.
3.
Specify the detail Port alias or description an alphanumeric string describing the full name
and version identification for the system’s hardware type, software version, and networking
application.
4.
Click Apply.
Figure 4-1: The Port Configuration
Parameter description:
Port :
This is the logical port number for this row.
Summary of Contents for 94-1518PF
