Manufacture Corporation 94-1518PF, User Manual

Page: 128 / 280

119
topology changes to other Ports. This parameter is “No” by default. If set it can cause
temporary loss of connectivity after changes in a spanning trees active topology as a result
of persistent incorrectly learned station location information. It is set by a network
administrator to prevent bridges external to a core region of the network, causing address
flushing in that region, possibly because those bridges are not under the full control of the
administrator. Or the status of MAC operation for the attached LANs transitions frequently.

Mcheck :
The same definition as in the RSTP specification for the CIST ports.
Buttons

Apply :
Click to save changes.

Back :
Click to undo any changes made locally and return to the Users.

Instance Status to Instance 0 :
Figure 8-3: Instance Status to Instance 0
Parameter description:

MSTP State :
MSTP protocol is Enable or Disable.

Force Version :
It shows the current spanning tree protocol version configured.

Bridge Max Age :
It shows the Max Age setting of the bridge itself.

Bridge Forward Delay :
It shows the Forward Delay setting of the bridge itself
.

Bridge Max Hops :
It shows the Max Hops setting of the bridge itself.

Instance Priority :