Manufacture Corporation 94-1518PF, User Manual

Page: 242 / 280

233
13-6 Port Security
13-6.1 Configuration
This section shows you to configure the Port Security settings of the Switch. You can use the
Port Security feature to restrict input to an interface by limiting and identifying MAC addresses.
Web Interface
To configure a Port Security Configuration in the web interface:
1.
Click Security, Port Security and Configuration.
2. Select “Enabled” in the Mode of System Configuration.
3. Set Mode(Enabled, Disabled), Limit, Action (Trap, Shutdown, Trap & Shutdown) for each
port.
4. Click the Apply to save the setting.
5. If you want to cancel the setting then you need to click the Reset button. It will revert to
previously saved values.
Figure 13-6.1: The Port Security Configuration
Parameter description:
System Configuration

Mode :
Indicates if Limit Control is globally enabled or disabled on the switch. If globally disabled,
other modules may still use the underlying functionality, but limit checks and corresponding
actions are disabled.
Port Configuration
The table has one row for each port on the selected switch and a number of columns, which
are:

Port :
The port number to which the configuration below applies.

Mode :
Controls whether Limit Control is enabled on this port. Both this and the Global Mode must
be set to Enabled for Limit Control to be in effect. Notice that other modules may still use