Manufacture Corporation 94-1518PF, User Manual

Page: 204 / 280

195
13-2.3 Trap Event Severity
This page displays current trap event severity configurations. Trap event severity can also be
configured here.
Web Interface
To display the configure Trap Event Severity in the web interface:
1.
Click Security, SNMP and Trap Event Severity.
2. Scroll to select the Group name and Severity Level
3. Click the Apply to save the setting
4. If you want to cancel the setting then you need to click the Reset button. It will revert to
previously saved values
.
Figure 13-2.3: The Trap Event Severity Configuration
Parameter description:

Group Name :
The name identifying the severity group.

Severity Level :
Every group has an severity level. The following level types are supported:
<0> Emergency: System is unusable.
<1> Alert: Action must be taken immediately.
<2> Critical: Critical conditions.
<3> Error: Error conditions.
<4> Warning: Warning conditions.
<5> Notice: Normal but significant conditions.
<6> Information: Information messages.
<7> Debug: Debug-level messages.

Syslog :
Enable - Select this Group Name in Syslog.

Trap :
Enable - Select this Group Name in Trap.
Buttons

Apply :
Click to save changes.