Manufacture Corporation 94-1518PF User Manual Download Page 179

Page: 179 / 280

170

12-2.2 Statistics

This page provides statistics for DHCP relay.

Web Interface

To monitor a DHCP Relay statistics in the web interface:

Click DHCP, Relay and Relay Statistics.

To display DHCP relay statistics.

Figure 12-2.2: The DHCP relay statistics

Parameter description:

Server Statistics



Transmit to Server :

The number of packets that are relayed from client to server.



Transmit Error :

The number of packets that resulted in errors while being sent to clients.



Receive from Server :

The number of packets received from server.



Receive Missing Agent Option:

The number of packets received without agent information options.



Receive Missing Circuit ID :

The number of packets received with the Circuit ID option missing.



Receive Missing Remote ID :

The number of packets received with the Remote ID option missing.

Client Statistics



Transmit to Client :

The number of relayed packets from server to client.



Transmit Error :

The number of packets that resulted in error while being sent to servers.



Receive from Client :

The number of received packets from server.



Receive Agent Option :

Summary of Contents for 94-1518PF

























































































































































































































































































Search results

Summary of Contents for 94-1518PF

Reviews:

Related manuals for 94-1518PF

Brands by name

Popular brands

Manufacture Corporation 94-1518PF, User Manual

Search results

Summary of Contents for 94-1518PF

Reviews:

Related manuals for 94-1518PF

Brands by name

Popular brands