Manitowoc Welbilt Indigo NXT QuietQube, Manual

Page: 19 / 183

© Welbilt, Inc.
Disconnect within 6 feet
from Condensing Unit.
Install strain relief and proper
wiring to ice machine
Electrical
19
QuietQube / CVD Installation
Important:
Due to continuous improvements, this information is
for reference only. Please refer to the ice machine
serial number tag to verify electrical data.
•
Ice machine must be grounded
•
Separate fuse/circuit breaker must be provided for
each ice machine
• Qualified electrician must determine proper wire
size
• Maximum allowable voltage variation is ±10% of
the rated voltage at ice machine start-up
• Check all green ground screws in the control box
and verify they are tight before starting the ice
machine.
Wiring for the CVD condensing units should be a solid copper
conductor.
Mount Disconnect Here
Removable Panel
Ice Machine Voltage Maximum
Fuse/Circuit
Breaker
Ice Beverage
Model Head
Section
115/1/60
230/1/50
15 amp
All Non – IB Model
Head Sections
115/1/60
230/1/50
15 amp
CVDF0600 208-230/1/60
208-230/3/60
208-230/1/50
15 amp
CVDF0900 208-230/1/60
208-230/3/60
208-230/1/50
20 amp
15 amp
20 amp
CVDT1200 208-230/1/60
208-230/3/60
25 amp
15 amp
CVDF1400 208-230/1/60
208-230/3/60
20 amp
15 amp
CVDF1800 208-230/1/60
208-230/3/60
208-230/1/50
40 amp
25 amp
40 amp
CVDF2100 208-230/1/60
208-230/3/60
50 amp
30 amp