3
Installation
Location of Ice Machine
The location selected for the ice machine must meet
the following criteria. If any of these criteria are not
met, select another location.
•
The location must be indoors.
•
The location must be free of airborne and other
contaminants.
•
The air temperature must be at least 10ºC but must
not exceed 43.4ºC.
•
The location must not be near heat-generating
equipment or in direct sunlight.
•
The location must be capable of supporting the
weight of the ice machine and a full bin of ice.
•
The location must allow enough clearance for water,
drain, and electrical connections in the
rear of the
ice machine.
•
The location must not obstruct airflow through or
around the ice machine (condenser airflow is in and
out the front). Refer to the chart below f or clearance
requirements.
*NOTE:
The ice machine may be built into a cabinet.
There is no minimum clearance requirement for the
top or left and right sides of the ice machine. The listed
values are recommended for efficient operation and
servicing only.
Self-Contained
Air-Cooled
Self-Contained
Water-Cooled
Top/Sides
203 mm (8")*
127 mm (5")*
Back
127 mm (5")*
127 mm (5")*
Summary of Contents for UG018A
