Manitowoc RNS012, Technician'S Handbook, Page: 44 / 124

36 Part Number STH044 10/13
Component Disassembly For Cleaning
And Sanitizing
GENERAL INFORMATION
1. Turn off the water supply to the ice machine at the
water service valve, or disconnect water supply
line at float valve quick disconnect by depressing
stainless steel lever.
2. Remove the components you want to clean or
sanitize. See the pages specific to the model you
are working on for removal procedures.
3. Soak the removed parts to clean and sanitize.
4. Use a soft-bristle brush or sponge (NOT a wire
brush) to carefully clean the parts.
5. Use the solution and a brush to clean all
disassembled components and the inside of the
bin.
6. Re-install the removed parts and turn on the water
and electrical supply.
!
Warning
Disconnect electric power to the ice machine at the
electric switch box before proceeding.
! Warning
Wear rubber gloves and safety goggles (and/or face
shield) when handling Ice Machine Cleaner or
Sanitizer.
!
Caution
Do not mix Cleaner and Sanitizer solutions together.
It is a violation of Federal law to use these solutions
in a manner inconsistent with their labeling.
Solution
Type
Water Mixed With
Cleaner 1 gal. (4 L) 16 oz. (500 ml) cleaner
Sanitizer 3 gal. (11 L) 2 oz. (60 ml) sanitizer