Manitou MSI 40, Operator'S Manual

Page: 93 / 116

3 - 23
Handling and servicing a battery can be dangerous, take the following
precautions :
- Wear protective goggles.
- Keep the battery horizontal.
- Never smoke or work near a naked flame.
- Work in a well-ventilated area.
- In the event of electrolyte being spilled onto the skin or splashing in the
eyes, rinse thoroughly with cold water for 15 minutes and call a doctor.
D8 - C
LEAN THE FUEL LIFT PUMP
- Lift up the cabin (See chapter : INSTRUMENTS AND CONTROLS in
paragraph : 2 - DESCRIPTION).
- Unscrew retaining screw 1 (Fig. D8).
- Remove the strainer 2 (Fig. D8).
- Carefully clean the interior of fuel lift pump, strainer and cover using a brush
immersed in clean diesel oil.
- Refit the assembly and make sure that the connection between the cover
and the body of pump is perfectly right.
- Re-prime the fuel lift pump.
D9 - C
H E C K
,
C L E A N A N D L U B R I C AT E T H E M A S T
LIFTING CHAINS
- Wipe the mast lifting chains 1 (Fig. D9) with a clean, lint-free cloth, then
examine them closely so as to detect any signs of wear.
- Vigorously brush the chains to get rid of any foreign matter, with a hard
nylon brush and clean diesel fuel.
- Rinse the chains by means of a paint brush impregnated with clean diesel
fuel and dry them with a compressed air jet.
- Moderately lubricate the chains with a paint brush impregnated with oil (See
chapter : LUBRICANTS AND FUEL in paragraph : 3 - MAINTENANCE).
- Remove the excess of oil with a clean cloth on the full length of the mast
lifting chains.
In case of technical faults, consult your dealer.
D10 - G
R E A S E T H E PA R K I N G B R A K E L E V E R
MECHANISM
- Release the protective boot 1 (Fig. D10).
- Clean and grease articulation axles 2 (Fig. D10) with grease (See chapter :
LUBRICANTS AND FUEL in paragraph : 3 - MAINTENANCE).
- Refit the protective boot 1 (Fig. D10).
D10
D9
1
1
2
2
2
D8
1
2