Manitou MSI 40, Operator'S Manual

Page: 78 / 116

3 - 8
F8 - Check the steering system (*).
F9 - Clean the hydraulic oil tank (*).
F10 - Check the oscillation of the rear axle (*).
F11 - Check and adjust the valves clearances (*).
F12 - Check the injectors (*).
F13 - Check and scale the radiator (*).
F14 - Check the water pump and the thermostat (*).
F15 - Check the condition of the mast assembly (*).
(*) : (Consult your dealer)
G - E
VERY
4800
WORKING HOURS SERVICE
G1 - Check the wear of the brake disks (*).
G2 - Check the steering axle (*).
G3 - Check the clearance of the front wheel reducers (*).
G4 - Check the bearings clearance of the transfer box (*).
G5 - Check the alternator and the starter motor (*).
(*) : (Consult your dealer)
H - O
CCASIONAL MAINTENANCE
H1 - Bleed the fuel system.
H2 - Change a wheel.
H3 - Tow the lift truck.
H4 - Sling the lift truck.
H5 - Transport the lift truck on a flat semitrailer.
H6 - Lift the cabin in case of electric failure.
H7 - Lift the cabin in the event of an hydraulic failure in the lifting system.
H8 - Lift the cabin in the event of a mechanical failure in the lifting system. 3 - 30
3 - 32
3 - 33
3 - 34
3 - 35
3 - 36
3 - 37
3 - 38