Manitou MSI 40, Operator'S Manual

Page: 52 / 116

2 - 24
J - FUSES BOX
Remove the cover to replace a fuse.The using is described herewith from L.H. to R.H. :
1 : fuse hand the left : Indicators (7,5A).
2 : Horn. + Stop swith (7,5A).
3 : OPTION R.H sidelight. + R.H rear light (7,5A).
4 : OPTION L.H sid L.H rear light (7,5A).
5 : OPTION Dipped headlights (7,5A).
6 : Forward / Reverse (7,5A).
7 : H 2nd heating OPTION (7,5A).
8 : Front windscreen wiper and windscreen Brake oil level lamp (7,5A).
9 : OPTION Warning light (7,5A).
10 : OPTION (7,5A).
11 : OPTION (7,5A).
12 : OPTION Main beam (7,5A).
NOTE : Replace a used fuse with a new fuse of the same quality and capacity. Never reuse a repaired fuse.
4 - S
WITCH
'
S AND LAMP
'
S PANEL
A - Front windscreen wiper switch and windscreen washer.
B - OPTION heater fan switch.
C - R ear windscreen washer switch.
E - OPTION warning light switch.
D - Brake oil level lamp.
F - OPTION working head light switch.
or
OPTION left working head light switch.
G - OPTION flashing alarm light switch.
H - OPTION working tail light switch.
or
OPTION left working tail light switch.
A - FRONT WINDSCREEN WIPER SWITCH AND WINDSCREEN WASHER
This two position switch, when set on the "down" position and simultaneously pressed, allows the windscreen-washer and the
windscreen wiper to be operated, and when set on the "up" position, the windscreen wiper to be operated.
B - HEATER FAN SWITCH
This two speed switch allows warm or cold air to pass through the heating ventilators.
C - REAR WINDSCREEN WASHER SWITCH
D - BRAKE OIL LEVEL LAMP
This lamp comes on when the brake oil level is insufficient. If an abnormally low level is noted consult your dealer.
G A E F
B C D H