Manitou MSI 40, Operator'S Manual

Page: 83 / 116

3 - 13
B2
B2 - C
HECK THE HYDRAULIC OIL LEVEL
Place the lift truck on level ground with the I.C. engine stopped and the mast
lowered as far as possible.
- Lift up the cabin (See chapter : INSTRUMENTS AND CONTROLS in
paragraph : 2 - DESCRIPTION).
- Refer to gauge 1 (Fig. B2).
- The level is correct when it is equidistant between the lower and the upper
marks.
- If necessary, add oil (See chapter : LUBRICANTS AND FUEL in paragraph :
3 - MAINTENANCE) by the filler port 2 (Fig. B2).
Use a clean funnel and clean the underside of the oil drum before filling.
Always maintain the oil level at maximum as cooling depends on the oil
flowing through the tank.
B3 - C
HECK THE BRAKING OIL LEVEL
Place the lift truck on level ground.
- Disassemble the access panel 1 (Fig. B3/1).
- The level is correct when it is at the maximum level on the tank.2 (Fig.
B3/2).
- If necessary, add oil (See chapter : LUBRICANTS AND FUEL in paragraph :
3 - MAINTENANCE) by the filler port.
- Reassemble the access panel 1 (Fig. B3/1).
If the braking oil level is abnormally low, consult your dealer.
1
2
B3/2
B3/1
2
1