Manitou B-E2 Series, Operator'S Manual

Page: 51 / 134

2 - 21
SEAT DEPTH ADJUSTMENT (FIG. D)
The depth of the seat may be adjusted to suit the individual.
- Press the right-hand button while raising or lowering the seat to find the desired position.
EXTENDING THE HEAD-REST (FIG. E)
- The height of the back-rest can be adjusted by pulling it upwards (the notches will click)
up to the stop.
- The head-rest can be removed by applying sufficient pressure to pull it off the stop.
LUMBAR ADJUSTMENT (FIG. F)
This increases the comfor t of the seat and the driver’s freedom of movement.
- Turn the handle either left or right to adjust the height or depth of the lumbar suppor t.
ADJUSTMENT OF THE ANGLE OF THE BACK-REST (FIG. G)
- Suppor t the back-rest, pull the lever and position the back-rest to find the desired
position.
If you do not support the back-rest when making adjustments, it swings completely
forwards.
LONGITUDINAL ADJUSTMENT (FIG. H)
- Adjust the locking lever until you reach the position required. This then locks and the seat
will not shift into another position.
MAINTENANCE (FIG. I)
Dir t may adversely affect the correct functioning of the seat. For this reason, make sure
your seat is always clean.
- To clean or change the cushions, simply remove them from the seat frame.
A rocking head-rest increases the risk of an accident !
Avoid wetting the cushion fabric when cleaning. Check the resistance of the fabric on a
small hidden area before using any fabric or plastic cleaner.
F
D
E
G
I H