Manitou B-E2 Series, Operator'S Manual

Page: 102 / 134

3 - 28
D10 - TRANSFER BOX OIL
DRAIN
Place the lift truck on level ground with the engine stopped and the transfer box oil still
warm.
Dispose the drain oil in an ecological manner.
- Remove access panel 1 (fig. D10/1).
- Place a container under drain plug 2 (fig. D10/2) and unscrew the plug.
- Remove level and filler cap 3 (fig. D10/2) in order to ensure that the oil is drained
properly.
- Refit and tighten drain plug 2 (fig. D10/2) (tightening torque 34 to 49 N.m).
- Fill up with oil (see: 3 - MAINTENANCE: LUBRICANTS AND FUEL) by filler por t 3 (fig.
D10/2).
- The level is correct when the oil is flush with the edge of the hole.
- Check for any possible leaks at the drain plug.
- Refit and tighten level and filler cap 3 (fig. D10/2) (tightening torque 34 to 49 N.m).
D11 - FRONT AND REAR AXLE DIFFERENTIAL OIL
DRAIN
Place the lift truck on level ground with the I.C. engine stopped and the differential oil still
warm.
Dispose the drain oil in an ecological manner.
- Place a container under drain plug 1 (fig. D11) and unscrew the plug.
- Remove level and filler cap 2 (fig. D11) in order to ensure that the oil is drained properly.
- Refit and tighten drain plug 1 (fig. D11) (tightening torque 34 to 49 N.m).
- Fill up with oil (see: 3 - MAINTENANCE: LUBRICANTS AND FUEL) by filler por t 2 (fig. D11).
- The level is correct when the oil is flush with the edge of the hole.
- Check for any possible leaks at the drain plug.
- Refit and tighten level and filler cap 2 (fig. D11) (tightening torque 34 to 49 N.m).
- Repeat this operation for the rear axle differential.
D10/2
3
2
D11
1
2
D10/1
1