Cayenne
™
Series
V.121806
F4
Power Output
Press
F4
to select the power output setting for the quartz
heating elements. The range of power is from a minimum
of 1% to a maximum of 100%. The current power output
setting displays on the lower line.
Press the arrow up (increase) and arrow down (decrease)
keys to change the power output setting.
F4
Mode of
Operation
Press the
F4
key twice to select the mode of operation for
the flash cure, PLC mode or Proximity mode. The control
displays
MODE
on the upper line, and either
PRX
or
PLC
on the lower line indicating which mode is currently
selected. Press the arrow keys to change the mode.
Note: In
PLC
mode, the flash cure receives its start signal from
the PLC on the press. In
PRX
mode, the flash cure
receives its start signal from the floor stand mounted
proximity switch.
F4
Communication
Protocol (Z-
Series Press
Only)
Press
F4
key three times to select the communications
protocol. The control displays
MDBUS
on the upper line,
and either
YES
or
NO
on the lower line indicating if the
protocol is currently selected. Press the arrow keys to
change the protocol.
Note: When
YES
is selected, the flash cure is controlled from the
main control panel.
22
M&R Companies 1N 372 Main St. Glen Ellyn, IL 60137 USA
Tel: +630-858-6101 Fax: +630-858-6134
www.mrprint.com
