Cayenne
™
Series
V.121806
4.3
Install Quartz Heating Elements
Avoid Heating
Element
Damage
Oily or foreign substances will damage the heating element. In case of contact, wipe the surface with
Isopropyl Alcohol. Always wear lint-free gloves when handling the heating element.
WARNING:
Never operate the flash cure when placed on
its side. In this position, the quartz heating element
filaments (1) compress and arcing results in premature
failure of the element filament. Always operate the flash
cure with the quartz heating elements in the horizontal
(normal operating) position.
Step 1
The quartz heating element has a female electrical
connector (1) at both ends.
Step 2
Hold the quartz heating element near both ends and push
the female electrical connector onto the spring loaded male
contact (1).
Step 3
Place the opposite end of the quartz heating element on the
male pin contact (1) on the other side of the reflector
assembly; allow the spring loaded pressure to hold it in
position.
Step 4
Install the remaining quartz heating elements as described in the previous steps.
14
M&R Companies 1N 372 Main St. Glen Ellyn, IL 60137 USA
Tel: +630-858-6101 Fax: +630-858-6134
www.mrprint.com
