V.
121806
Cayenne
™
Series
5. Operation
5.1 Control
Panel
Number
Name
Function
1
POWER ON /
OFF Switch
The
POWER
ON/OFF
switch supplies electrical power to the flash cure.
Place the switch in the
ON
position to
turn on
.
Place the switch in the
OFF
position to
turn off
.
2
RESET Button
The
RESET
button resets the control system, allowing operation of the flash cure.
3
Digital Controller
The
Digital Controller
selects temperature, output power, exposure time, lamp
section selection and mode of operation; proximity or PLC. The controller also selects
flash cure unit number, either Fahrenheit or Celsius temperature display and 50 or 60
Hz. electrical supply frequency.
4
PREHEAT ON /
WORK / OFF
Switch
The
PREHEAT ON/WORK/OFF
switch is used to preheat the quartz heater elements
when the flash cure is turned on.
PREHEAT
ON
(momentary position) activates the
quartz bulbs for the time set. During the preheat time, the switch may be placed in
the
OFF
position to disconnect power to the bulbs.
WORK
position shows the flash
cure is ready to work in either the PLC or PROX mode. In the
OFF
position, the bulbs
cannot receive power or energize regardless of which mode, PLC or PROX, is
selected.
5
OUTSIDE
SECTION
This light illuminates when the outside section of quartz heater elements are
operating. When not illuminated, the outside section of quartz heater elements is not
operating.
6
CENTER
SECTION
This light illuminates when the center section of quartz heater elements are operating.
When not illuminated, the center section of quartz heater elements is not operating.
7
INSIDE SECTION
This light illuminates when the inside section of quartz heater elements are operating.
When not illuminated, the inside section of quartz heater elements is not operating.
M&R Companies 1N 372 Main St. Glen Ellyn, IL 60137 USA 19
Tel: +630-858-6101 Fax: +630-858-6134
www.mrprint.com
