M&C GenTwo PMA1000V2.4, Instruction Manual

Page: 4 / 110

3
GenTwo® PMA1000 V2.4 | 1.00.00 www.mc-techgroup.com
8 Using the analyzer 26
8.1 Graphical user interface (GUI) 26
8.2 How to use the touch screen 26
8.3 Menu structure 27
8.3.1 System status line 28
8.3.2 Main menu bar 29
8.3.3 Main display area 30
8.3.4 Language selection 30
8.3.5 M1/S1 and M1/S2 - M&C contact and GUI version number 31
8.3.6 M1/S4 - Operating hours counter 33
8.3.7 M2/S1, M2/S2 - Measured values, operational parameters and limits 33
8.3.8 M2/S3 - Event list
36
8.3.9 M3/S1 - Data logger/history archive 37
8.3.10 M4/S1 - Measuring range selection, sensor evaluation, Lim settings 38
8.3.11 M4/S2 - Settings menu/ parameters
42
8.3.12 M5/S1 and M5/S2 calibration menu 57
8.3.13 M6/S1 Help button 58
9 Mounting and installation 59
9.1 General 59
9.2 Wall-mount housing: electrical connection 60
10 Starting-up and operating the analyzer 62
10.1 Preparations for start-up 62
10.2 Start-up and operation 62
10.3 Confirm system messages 64
11 Calibration 65
11.1 General 65
11.2 M5/S1 Manual Calibration (ManuCal) 65
11.3 Automatic Calibration (AutoCal) 71
11.3.1 AutoCal for external mounting of the solenoid valves 73
11.3.2 Example: AutoZero with zero gas (N
2
) 75
11.3.3 Setting the mA behaviour during calibration 76
11.3.4 Parameter settings for automatic calibration 77
11.4 Adjust pressure gauges and flow sensor 78
11.5 Cross-sensitivity of coexisting gases 79
11.5.1 Cross-sensitivity of oxygen sensor (PMA2) 79
12 Service and maintenance 83
12.1 Cleaning and decontamination 83
12.2 Recommended maintenance work 84
13 Options and spare parts list 85