M&C GenTwo PMA1000V2.4, Instruction Manual

Page: 107 / 110

106
GenTwo® PMA1000 V2.4 | 1.00.00 www.mc-techgroup.com
Fig. 44: M4/S2 screen with “Restart” button
43
Fig. 45: Channel settings
44
Fig. 46: Basic settings for channel 1
45
Fig. 47: Keypad
45
Fig. 48: Channel-specific settings list
46
Fig. 49: System settings
48
Fig. 50: Scroll bar with “4=Updates” displayed in the gray frame
49
Fig. 51: Buttons to get information and install hardware and software updates
49
Fig. 52: Screen to confirm the update of the application software
50
Fig. 53: M4/S2 screen with “Factory reset” selected
50
Fig. 54: Select factory settings
51
Fig. 55: Database settings
51
Fig. 56: IP address input screen
52
Fig. 57: Date and time settings
53
Fig. 58: Supervisor settings for administrators
54
Fig. 59: PDF1 update
54
Fig. 60: Scroll bar with “B=Diagnosis” displayed in the gray frame
55
Fig. 61: Schematic for diagnosis
55
Fig. 62: IO1 component: DO1 to 4, relay outputs R1, R2 and mA output
56
Fig. 63: Display of the highlighted IOAC-0 components
56
Fig. 64: Service settings
57
Fig. 65: Gas calibration screen
57
Fig. 66: Adjust pressure gauges and flow sensor
58
Fig. 67: Power supply connections inside wall-mount housing
61
Fig. 68: Warm-up phase in M2/S1 and warm-up info on M2/S2
62
Fig. 69: Analyzer is ready to operate
63
Fig. 70: Manual calibration (ManuCal)
65
Fig. 71: Setting the channel-specific calibration parameters
66
Fig. 72: Manual calibration with span gas
66
Fig. 73: First step of the manual calibration procedure
67
Fig. 74: Second step of the manual calibration procedure
67
Fig. 75: Third step of the manual calibration procedure
68
Fig. 76: End of the manual calibration procedure
68
Fig. 77: Data logger screen with calibration symbols
69
Fig. 78: A terminated manual calibration procedure
69
Fig. 79: Manual calibration error
70
Fig. 80: Datalogger screen with red calibration symbol
70
Fig. 81: Screen showing details about a single calibration procedure
71
Fig. 82: Activating AutoCal and entering parameters
71
Fig. 83: Diagnostic diagram: Opening the output card “IOAC 0”
73
Fig. 84: Diagnostic diagram: Opened output card
73
Fig. 85: AutoCal extern. valves: zero and span gas via gas cylinder
74
Fig. 86: AutoCal ext. valves: span gas via filter and pump, zero gas via gas cylinder
74
Fig. 87: AutoZero with gas cylinder for zero gas (N
2
)
75