M&C GenTwo PMA1000V2.4, Instruction Manual

Page: 39 / 110

38
GenTwo® PMA1000 V2.4 | 1.00.00 www.mc-techgroup.com
With the ‘Export *.csv’ button recorded data can be stored in the analyzer for a period of
one hour with the selected start time. This data can also be stored on a USB stick in CSV
format. The CSV format can be opened in spreadsheet programs such as MS Excel.
To export data, please select the month, day and hour of the desired data recording. Each
file can only store one hour of the recorded data, therefore the desired hour must be se-
lected for the data export.
Tap on the *.csv export button to export the selected data and save the data to a CSV file.
Note
If you don’t select the hour of the recorded data, the measurements
of the whole month or day will be displayed in the diagram.
This amount of data is too large to save in one file. To prevent a larger
file size the “*.csv export” button will not be displayed if the data is
recorded for more than an hour.
Fig. 38: Calibration symbols to highlight calibration procedures
These symbols indicate successful and failed calibration procedures.
The calibration symbols are displayed in the upper half of the diagram in section M3/S1.
The red symbol shows a failed calibration process and the green symbol indicates a suc-
cessful calibration.
8.3.10 M4/S1 - Measuring range selection, sensor evaluation, Lim settings
Tap on the M4 setting button to select predefined measuring ranges, display the list of
sensor evaluation and set limit values. The start screen opens. There is an edit button next
to the values for each possible setting and display.