M&C GenTwo PMA1000V2.4, Instruction Manual

Page: 34 / 110

33
GenTwo® PMA1000 V2.4 | 1.00.00 www.mc-techgroup.com
8.3.6 M1/S4 - Operating hours counter
The operating hours counter shows the days and hours that the entire device and the in-
dividual channels are in operation. Under” Service” the operating times are listed, accord-
ing to which the components of the used channels should be serviced.
Fig. 28: M1/S4 - Operating hours counter (OHC)
Note
The operating hours counter of the analyzer cannot be reset by the
user.
8.3.7 M2/S1, M2/S2 - Measured values, operational parameters and limits
You can reach the start screen by tapping on the Home button M2 in the menu bar. This
section contains the following information:
„
currently used channel with channel name
„
measured value
„
unit of measured value
„
bar graph with measuring range and indicator light