M&C GenTwo PMA1000V2.4, Instruction Manual

Page: 64 / 110

63
GenTwo® PMA1000 V2.4 | 1.00.00 www.mc-techgroup.com
Fig. 69: Analyzer is ready to operate
NOTICE
The measuring mode is interrupted while the parameter menu is
open.
Within M4/S2, the measuring operation of the analyzer is interrupted
when the following selection wheel functions are selected:
4 = Updates
7 = IP config
8 = Date/Time
B = Diagnosis
No measurement results are stored or displayed during this period.
Only in the setting screen “B = Diagnosis” the display returns to the
start screen M2/S1 after 30 minutes without input.
The analyzer is in operation mode when the screen symbol in the
status line flashes green. When the screen symbol is red or empty,
the analyzer’s measuring operation is interrupted.