27
5.2
Assess the patient
Before using the AED7000, the operator must first check the condition of the
patient. The AED7000 can be used on a patient, only if all the following conditions
are present:
Unconsciousness
Absence of breath
If both the conditions above exist, the AED7000 should be used immediately.
5.3
Start the AED7000 Automatic External Defibrillator
The operator should first start the AED7000 to check its working condition and
power condition.
5.3.1
Checking power condition
Pressing the ON/OFF button for 2~3seconds to start the AED7000, the power
indicator will turn on. If the indicator is flickering, it means that the AED7000 is in
the status of low power, and the current battery should be replaced.
5.3.2
Check the working condition
After the AED7000 starts, the AED7000 will begin to check the condition of the
pads connection.
Before the pads are properly connected, the AED7000 will prompt the operator to
insert the connector of the pads to the socket of the AED7000 and place the pads
correctly on the patient.
Check the electrodes.
