36
6.1.1
Inspection schedule
The general inspection schedules are described below. The operator should
follow these schedules when performing the inspection, as improper inspection
may cause damage to the AED7000.
Check the status of indicator and the voice prompt.
If the AED7000 is started without electrode pads connection, the indicator of
“Check pad” will be flickering and a voice prompt of “Check the electrode” will be
broadcast. In the absence of either status indicator above, contact the authorized
service personnel for the necessary servicing or repair.
WARNING!
If the conditions above are observed during the
inspection of the AED7000, the AED7000 must not be
used on any patient.
6.1.2
Check the battery
The AED7000 begins to check the capacity of the battery when it starts. If the
battery capacity is low, the Power LED will be flickering, otherwise the indicator
will be green.
If a low battery capacity occurs, replace the current battery with a
new one.
