– 15 –
Locking the harness:
Remove the yoke from the
harness tidy
, see above
.
Lock the harness by pushing
the tongues on the ends of
the waist straps into the
buckle on the crotch strap,
1
.
The harness will automatically
lock when the tongues have
been fully pushed in.
USING THE HARNESS TIDY
Unlocking the harness:
Squeeze the ends of the
tongues together,
2
and then
slide them out of the buckle,
3
. Your child can now be
removed from the pushchair.
IMPORTANT:
Every time you place your child in the pushchair or when ever
you alter the position of the backrest always check that the harness is correctly
fitted and adjusted using the shoulder and waist strap buckles. Tighten the
harness until it fits snugly around your child.
You will find a tab on the
adjustment yoke at the back
of the harness where the
shoulder straps join the waist
strap. Place the tab on the
adjustment yoke through the
fabric loop in the middle of
the backrest when not in use.
Do not use the harness tidy
whilst the harness is fitted
to the child.
IMPORTANT:
The harness tidy is designed to only be used to prevent the
harness from becoming tangled when not in use. Never secure your child into
the safety harness whilst it is still held in the harness tidy on the rear backrest.
USING AND ADJUSTING THE HARNESS
– 14 –
OPENING & REMOVING THE BUMPER BAR
With the buttons held in, pull
both ends of the bumper bar
away from the armrests.
Always fit the bumper bar
when your child is in the seat.
Opening the bumper bar:
As your child gets older, you
may wish to open one side of
the bumper bar in order to
allow easier access to the
pushchair seat.
Locate the button on the
underside of the armrest and
push it upwards.
With the button held in, pull
one side of the bumper bar
from the armrest to open.
To close the bumper bar,
depress the button and slot
the end of the bumper bar
back into the armrest. Check
it is locked in position by
attempting to pull it out
again.
Removing the bumper bar:
The bumper bar can be
completely removed for
cleaning or when a compatible
carrycot is attached to the
pushchair.
Locate the buttons on the
underside of the armrests and
push them upwards.
WARNING:
Once the child is secured in the pushchair seat the bumper bar
must be locked into the armrest.
