– 25 –
FITTING A COMPATIBLE CARRYCOT
Apply the brakes.
Recline the backrest to its
lowest position (
see page 9
).
Remove the bumper bar,
see
page 14
.
Raise the leg rest to its
highest position,
see page 10
.
In the corners of the seat
where the backrest joins the
seat base, there are two fabric
flaps. Under the flaps are the
two attachment brackets.
Rotate the attachment
brackets up until they lock in
the vertical position.
With the head end of the
carrycot facing towards the
front of the pushchair, align
the two recesses in the sides
of the carrycot with the
attachment brackets. Then
lower the carrycot onto them.
Push the carrycot down onto
the attachment brackets until
it locks into place.
Check the carrycot is firmly in
place by attempting to lift it
from the pushchair.
– 24 –
REMOVING THE PRIMO VIAGGIO CAR SEAT
Note:
Always apply the
brakes on the pushchair
before removing the car seat.
Pull the lever located on the
back of the car seat upwards
and hold in the fully pulled
out position.
Lift the car seat clear of the
pushchair.
Pull the locks on the sides of
the frame outwards and hold.
Push the attachment brackets
down into the recesses and
pull the fabric cover back over
them.
WARNING:
Never place a
child in the pushchair with the
attachment brackets up
.
