– 7 –
FITTING THE BUMPER BAR
Remove the caps in the ends
of the armrests by pushing
the button on the underside
of the armrest upwards.
With the button still pushed
in, slide the cap out of the
armrest.
Repeat the process for the
other armrest.
The bumper bar can be set in
two positions, the inner or
the outer setting.
To change the position of the
bumper bar,
push the buttons
under the armrests upwards
and slide the bumper bar in or
out as required until the
buttons lock into position.
Insert the two ends of the
bumper bar into the holes in
the ends of the armrests.
Push the bumper bar in until
the ends click into position.
– 6 –
ATTACHING THE WHEELS
Attaching the rear wheels:
Slot the rear wheels and brake
assembly onto the back legs
of the pushchair.
Ensure that the brake peddles
on the wheels are facing out
from the back of the
pushchair. Push the wheels
down until they lock into
position. The locking pins in
the rear legs must protrude
through the wheel housings.
Check the wheels are correctly
fitted by trying to pull them
from the frame.
Attaching the front wheels:
Ensure the swivel wheel lock
is in the down position. Slot
the two front wheels onto the
ends of the front legs.
Push the wheel housing onto
the end of the leg until it
locks into position.
Always check that the wheels
are correctly fitted by
attempting to pull them from
the frame.
