– 9 –
ADJUSTING THE BACKREST
Lowering the backrest:
Pull the backrest adjustment
handle upwards and lower the
backrest into the position you
require. Release the handle
and move the backrest up or
down until it locks into
position.
The backrest can be adjusted
to one of four positions.
Raising the backrest:
Grip the middle of the
backrest and lift upwards until
it locks in the position you
require.
– 8 –
FITTING AND REMOVING THE BASKET
Before fitting the basket you
will need to remove the
basket frame from the
pushchair.
Press the two buttons located
on the inside of the basket
frame at the rear of the
pushchair, and slide out the
frame.
Attach the two fabric loops at
the front of the basket over
the hooks under the seat.
Removal is the reverse of
fitting.
We recommend that you do
not exceed a load of 3kgs in
the basket. Excessive weight
can destabilise or damage the
basket.
When folding the pushchair
always check that the basket
is not trapped or preventing
the pushchair from locking.
Feed the basket frame
through the fabric rim of the
basket.
Re-attach the basket frame to
the pushchair. Insert the ends
of the basket frame into the
plastic housing on the rear
legs and push it in until it
locks into place.
