– 17 –
USING THE PUSHCHAIR AS A PRAM
Lower the backrest into the
lowest position,
see page 9.
Lift the foot end of the pram
upwards from the seats
backrest.
Fitting the hood:
Attach the hood to the frame
on the opposite side to the
handles by pushing the hood
brackets onto the frame until
they lock in place.
Fasten the studs on the back
of the hood to the studs on
the underside of the
pushchair footrest.
Push the tensioning bars on
the sides of the hood down
until they lock into place.
Fold the flaps on the hood up
between the inside of the
hood and the armrests.
Attaching the apron:
Slot the apron over the
backrest of the pushchair.
Fasten the press studs on the
sides of the apron to the
studs on the sides of the
pushchair.
Reverse this procedure to
convert the pram back into a
pushchair.
– 16 –
USING THE PUSHCHAIR AS A PRAM
The pushchair can be
converted into a pram for
children from birth until the
child can sit up by itself or
until it reaches a weight of
9kgs.
Remove the hood and apron
if they are fitted.
Raise the leg rest into its
highest position,
see page 10.
Slot the tab on the shoulder
straps of the harness into the
tab on the seats backrest,
see page 15.
Pull the bumper bar out to its
fully extended position,
see
page 7.
Unfasten the zip on the top
of the backrest.
Fold the cover down over the
front of the bumper bar
Zip the top of the backrest
cover to the front of the
footrest cover.
Push the cover down onto the
seat.
