– 21 –
SPECIAL FEATURE
Not all models of the A3 Pushchair are supplied with or use this
special feature. For more information please consult your retailer.
Before fitting the footmuff or
seat pad unfasten the harness
and slide the shoulder strap
clips off the tongues on the
ends of the waist straps.
FITTING A FOOTMUFF OR SEAT PAD
Shoulder
straps
Waist
strap
Waist
strap
Crotch
strap
Remove the crotch strap by
slotting the buckle on the end
of the crotch strap through
the hole in the seat and fabric
cover,
see page 31
.
Refit the crotch strap but first
slot the webbing through the
lowest hole in the footmuff,
back pad or seat pad.
Slot the two shoulder straps
through the horizontal slot in
the middle of the footmuff,
back pad or seat pad.
The two waist straps can
either go around the outside
of the back pad or seat pad,
as shown in
Version 1
.
Or slot them through
horizontal slots in the sides of
the footmuff, back pad or
seat pad, as shown on
Version 2
.
Finally, slide the shoulder
strap attachments back onto
the tongues on the ends of
the waist straps.
Crotch
strap
Shoulder
straps
Waist
strap
Waist
strap
Version 1
Version 2
Shoulder
straps
– 20 –
OPENING THE PUSHCHAIR
Grip the handlebar and pull
the catch on the primary
frame lock upwards to
disengage it.
Slide the button on the twist
grip secondary lock sideways
and hold whilst rotating it as
far as it will go.
Lift the pushchair upwards
and the frame will
automatically start to open.
Ensure that the pushchair is
fully open and that the locks
are correctly engaged.
You may need to press down
lightly on the seat to ensure
the safety locks have engaged
correctly.
