– 27 –
ATTACHING THE COPERTO RAINCOVER TO THE PUSHCHAIR
Attach the straps at the
bottom of the raincover
around the frame below the
footrest.
Zip the hood and raincover
together. Support the
raincover whilst zipping it to
the hood.
Attach the straps on the sides
of the raincover around the
frame. Fasten them in place
with the press studs on the
strap.
IMPORTANT:
The raincover is designed for outdoor use only. Take care when fitting
or adjusting the raincover as undue force may damage it. Open the front of the
raincover when inside or in hot weather to prevent your child from over heating.
– 26 –
REMOVING A COMPATIBLE CARRYCOT
Note:
Always apply the
brakes on the pushchair
before removing the carrycot.
Grip the centre of the
carrying handle with one
hand.
With the other hand, slide the
locking handle (positioned on
the foot end of the carrycot)
horizontally and then upwards
and hold.
Still holding the lock up, lift
the carrycot clear of the
pushchair.
Once the carrycot has been
removed always refit the
bumper bar,
see page 7
.
Pull the locks on the sides of
the frame outwards and hold.
Push the attachment brackets
down into the recesses and
pull the fabric cover back over
them.
WARNING:
Never place a
child in the pushchair with the
attachment brackets up
.
