31
M5 – Eco
CE
The material entrance
(A)
of the mixing chamber
and relative container must also be cleaned.
Procedure:
Tilt the mixing chamber upwards and use the
blocking lever
(1)
to make sure that the chamber
cannot fall.
Danger of being hurt!
The blocking lever must be secured to the side handle to avoid
the mixing chamber falling.
There is a cleaning hole on the lower side of the
material container.
The cleaning hole is for emptying the used materials
remaining in the container.
Everything must be carefully dried after cleaning the cell disc
and the container with water, otherwise the dry material would
thicken, obstructing the mixing chamber and overloading the
cell disc.
„Danger of damaging the machine!“
Note:
The dry material can stay in the machine even for a year if the
relative conservation regulations have been followed. In any case, we
recommend cleaning the container every two months if the machine is
not used during this period.
Opening the release taps
(A)
of
the pressure reduction motor and
the
flow
adjustment
device
empties the water in the water
plant.
This procedure must be carried out every day in winter to avoid
the water freezing inside the plant. We recommend emptying
the water every two months in the case of non-use to avoid the
formation of crustations due to deposits of impurities.
At night, and when the machine is not being used, it should be kept in a
dry place.
The cleaning hole must be closed, the cell disc mounted
correctly and the protection grill installed and fixed again
before restarting the machine.
(The description of the procedure is in the Chapter („FIRST
START-UP OF THE MACHINE“).
A
1
ATTENTION
Important
Important
ATTENTION
A
www.markham-sheffield.co.uk - Tel: +44 (0) 1909 730861
