10
M5 – Eco
CE
First start-up of the machine
It is necessary to read the present manual in detail before starting-up and
using the plant. The regulations contained within must be rigorously kept in
mind.
An incorrect or unsatisfactory start-up can cause damage to the single
components of the plant or be the cause of grave danger to people!
The manufacturer declines any responsibility if unauthorised
personnel carry out the first start-up!
It is necessary to keep the correct direction of rotation of the
pump of the motor! Inverse direction during use can damage
the machine. The exact procedures for the relative adjustment
can be found in the use manual.
If malfunctioning is discovered during the first start-up, this malfunctioning
must be repaired before using the machine. The coordinator is responsible
for the correct and sufficient training of all the operators of the machine.
Access of unauthorised personnel close to the machine during
the first start-up must be forbidden.
Start-up
The
MALTECH
machine can be used only in a perfect technical state.
All the safety devices must be examined before every new start
to check their efficiency. The use of the machine with defective
or extraneous safety devices is severely forbidden.
Only trained personnel can start the plant. The person in charge must
check the application of the safety regulations at work.
At least one operator must be near the control unit during the starting of
the machine.
During the mixing process it is necessary to check that the material has
been emptied from or placed into suitable containers and that no
damage has been caused by possible loss of material.
The machine must never be used outside its limit of efficiency or in ways
other than those described in the present manual.
The pump can be used only up to a maximum pressure of 40 bars,
otherwise the machine must be converted or hoses for suitable pressure
must be used.
Unauthorised people cannot use the machine.
Never open the electricity box during use in the building yard to carry out
repairs or checks.
Only materials indicated by the manufacturer can be used with the
MALTECH
machine and/or it is necessary to pay attention to the
indications of the relative manufacturers on the packaging of the materials
to check their compatibility for use on the machinery. In the contrary case,
materials can possibly damage the plant.
The
MALTECH
machine cannot be exposed to temperatures below 0°C to
avoid the elements that carry water freezing, because they would dry up.
Operating at temperatures less than 0°C and with frozen elements is
forbidden. Inobservance can cause damage to the plant and danger to
people.
Important
Important
Important
www.markham-sheffield.co.uk - Tel: +44 (0) 1909 730861
