12
M5 – Eco
CE
It is necessary to check on the manometer that the pressure has
been completely emptied out before removing a hose. The
pressurised tubing must be completely emptied, depending
upon the type of hose, as indicated elsewhere in the present
manual.
Only qualified electricians can repair damage to the electrical plant.
If damaged or missing parts are revealed during maintenance, these
problems must be solved immediately to guarantee the correct and safe
functioning of the machine.
Periodic maintenance / Repairs
Only the relative qualified technican personnel can carry out periodic
maintenance work!
The machine must be turned off during maintenance work,
disconnecting it from the power, turning the main switch off,
and removing the plug from the socket. The machine must be
protected from possible accidental start-ups!
No maintenance work can be carried out with the plant
functioning.
It is necessary to check on the manometer that the pressure has
been completely emptied out before removing a hose. The
pressurised tubing must be completely emptied, depending
upon the type of hose, as indicated elsewhere in the present
manual.
Repairs carried out in non-conforming ways can cause damage to the
plant and danger to people! The manufacturer declines any responsibility
for repairs carried out in non-conforming ways!
All the safety covers must be applied before re-starting the
machine again!
Spare parts must always conform to the technical standards. This
conformity is guaranteed using original Maltech spare parts. (The use of
non-original spare parts forfeits the guarantee).
If it is necessary to modify the machine, the manufacturer must first
approve these modifications in writing!
The control and safety units cannot undergo any modifications.
The declaration of CE conformity loses its validity.
Deactivating/dismantling
Only qualified technical personnel can dismantle the plant on the basis of
the data supplied in the present use manual!
Apply the safety regulations previously described in paragraphs „Transport“
and „Montage“.
Disposal
The regional regulations relative to the disposal of waste must be observed
in the case of partial or total disposal of the machine.
ATTENTION
ATTENTION
ATTENTION
ATTENTION
www.markham-sheffield.co.uk - Tel: +44 (0) 1909 730861
