6
M5 – Eco
CE
Symbols on the machine
The following symbols (references or also pictograms) are applied to the
machine and indicate dangerous areas and situations. These references
(pictograms) must be kept clean and immediately replaced in case of
defacement or damage.
Read the manual carefully
before beginning work.
Attention: electrified parts!
Extract the plug from the
socket before possible
direct contacts.
Parts that carry pressure!
Make sure to empty the
pressure from the machine
before possible cleaning or
maintenance work.
Attention: rotating parts!
Avoid performing
cleaning or maintenance
work with the machinery
in movement and without
adequate protection.
If using a lifting device for
transport, it is necessary to
use the reference points
envisaged and, if
necessary, marked.
Positions of the pictograms at the machine.
www.markham-sheffield.co.uk - Tel: +44 (0) 1909 730861
