WINTER MODE:
When the boiler is in this mode, it runs according to
central system temperature set by P2 key ( 30-85'C ).
Boiler provides the adjusted temperature automatically.
Provides constant temperature comfort with full
modulation system. DHW production is primary at the
winter mode. If it is required, DHW can be moved to OFF
position and only central system heating running can be
provided.
Water pressure value is displayed in this condition and
conditions of no need of heat.
CENTRAL SYSTEM (CS) TEMPERATURE SETTING
CS temperature is set to intended value by turning P2
key. Temperature increases in clockwise, decreases
counter clock wise. Adjusted temperature is blinked on
screen while adjusting.
After adjustment water temperature in boiler is displayed
on boiler screen.
DOMESTIC WATER (DW) TEMPERATURE SETTING
DW temperature is set to intended value by turning P1
key. Temperature increases in clockwise, decreases in
counter clock wise.
Adjusted temperature is blinked on screen while
adjusting. When it is at adjusted degree, adjustment is
recorded at the end of adjustment and adjustments is
completed. After adjustment water temperature in boiler
is displayed on boiler screen.
Attention!:
If the boiler won't be used for a long time, noone will be in the house
and there is a possibility of frost, discharge the water from heating circuit, close
the gas valve of the boiler and disconnect the electricity connection. Freezing
protection function will be unusable and damaged as a result of disconnecting
gas and electric without discharging the water completely.
Discharging Water from the Boiler :
Water inside the boiler can be discharge completely by using the discharging
valve which is at the bottom point of boiler heat system. Check the manometer
while discharging the and be sure it is 0 value and water leaking from the
discharging valve is completed.
15
