EFFICIENT USE OF BIOLERS IN TERMS OF ENERGY CONSUMPTION
Points to be considered about efficient energy use in houses, are stated below:
•There is %25-40 heat loss on the wall of buildings. The first precaution for energy
efficiency and low fuel consumption, must be enhancing the isolation. For this
purpose, outer walls of the building must be isolated from outside or inside.
•There is %20- 25 heat loss from the roofs.Soğuk çatılarda çatı arasına “TS 825
Binalarda Isı Yalıtım Kuralları” standartında belirtildiği şekilde ısı yalıtımı yapılmalıdır.
Heat isolation must be done in cold roofs lofts up to TS 825 Binalarda Isı Yalıtım
Kuralları '' standarts.
•Air and moisture leakage of the doors and windows in house must be provided with
proper materials.
•Double- glazed windows and doors, making shutter and blinds will decimate the heat
loss.
•If there is air and moisture leakage connection points of door and window frames and
walls will be filled up with filling material plaster,paste or silicone.
•Outer doors or other doors belong to the unwarmed places (bathroom, corridor) must
be closed as far as possible.
•Most of the cold air flow becomes from under the door. Spaces under the doors can
be filled with an elastic material filling.
•Building doors shouldn't left open, double door or automatic closing systems must be
applied.
•It is recommended to clean the windows for receiving more sunlight, close the
curtains at nights, leave south, west, southwest and southeast position curtains open
that are receiveing direct sunlight at winter time.
•Temperature shouldn't be increased more than adequate in winter time.
•When the temperature is too much, heater's regulation must be down instead of
opening windows.
•Moist air retain the heat well. In order to increase the felt temperature full of water pot
can be put on radiators. In this way place can be moisturised. %50-55 air moisturing
provides reducing vaporization and provides feeling temperature 2-3 ºC more.
•Marble etc. materials and covers shouldn't place on and laundry shouldn't make dried
on radiators.
•One side aluminium covered thermal insulting boards shouldn't be placed behind the
radiators and between radiator and wall.
•In unused parts of the house, temperature adjustment must be in minimum level.
Also isolation of hot water pipes must be done in unheated parts of the house.
•Windows shouldn't stay open more than one hour in a day in winter time for cleaning
the air in internal volumes.
•It is recommended to make maintenance and control of heating systems which
includes burner settings based on flue gas mesaurement by Maktek autorised
services before every heating season.
•Heat isolation of pipes and tanks must be done if the boilers are in a place that no
need of heating.
•Using boiler automatically with room termostat prevents overheating by heating up to
adjusted temperature and provides fuel saving.
•Using termostatic valves on radiators provides energy saving by preventing
overheating of radiators. Termostatic valves can be adjusted to the intended degree
24
