Makita BDF450, Instruction Manual

Page: 4 / 32

4
ENGLISH
Explanation of general view
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the tool. Be sure
that you understand their meaning before use.
Only for EU countries
Do not dispose of electric equipment together with house-
hold waste material!
In observance of European Directive 2002/96/EC on
waste electrical and electronic equipment and its imple-
mentation in accordance with national law, electric equip-
ment that have reached the end of their life must be
collected separately and returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
1. Battery cartridge
2. Button
3. Red
part
4. Switch trigger
5. Lamp
6. Reversing
switch lever
7. Speed change lever
8. Adjusting
ring
9. Graduations
10. Pointer
11. Sleeve
12. Screw
13. Hook
14. Groove
15. Limit mark
16. Rear cover 17. Screws
18. Spring
19. Arm
20. Recesed part
21. Carbon brush cap
22. Hole
Model BDF440 BDF450
Capacities
Steel 13 mm
Wood 27 mm
Wood screw ø 6.8 mm x 50 mm
Machine screw M6
No load speed (min
-1
)
High (2) 0 - 1,400
Low (1) 0 - 400
Overall length 186 mm
Net weight 1.6 kg 1.7 kg
Rated voltage D.C. 14.4 V D.C. 18 V