P
3
/
8
2) Remove the other Bow stop ring E-12, Lever plate, M8-13 Hex nut, Flat washer 8 (small) and M8x24 Cap square neck
bolt on the angular guide of Base. (Fig. 4)
3) Remove M8 Flat head screw on the angular guide. (Fig. 5) Base can be removed.
Do the reverse of the disassembling steps.
Note: 1) Be sure to set Flat washer 8 (large) in place when assembling Depth guide and the relative parts.
2) Secure Lever plate with Bow stop ring E-12. Bow stop ring E-12 isn't reversible when assembled.
Be sure to face the curved shape toward outside. (Fig. 6)
R
epair
Bow stop
ring E-12
Lever plate
Flat washer 8 (small)
M8x28 Cap
square neck bolt
M8-13
Hex nut
Fig. 4
Fig. 6
Fig. 5
M8-13 Hex nut
Flat washer 8
Lever plate
Bow stop ring E-12
Wrong
(The curved shape
faces inside.)
Curved
Curved
Outside
Inside (to Motor section)
Correct
[3] DISASSEMBLY/ ASSEMBLY OF BASE (cont.)
DISASSEMBLING
ASSEMBLING
angular guide
of Base
M8 Flat head screw
Base
M8 Hex. nut
Stopper plate
O ring 12
Flat washer 8 (small)
Spring washer 8
1) Remove Base from Motor section.
2) Safety cover and Spacer can be removed by extracting Retaining ring S-42 with 1R003. (Fig. 7) Spacer and Tension
spring 4 can also be removed. (Fig. 8)
3) Remove M5x18 Pan head screws (2pcs.) and M6x16 Pan head screw. (Fig. 8)
Grip, Hook assembly and Cover complete can be removed from Gear housing complete.
[4] DISASSEMBLY/ASSEMBLY OF GEAR SECTION
M6x16 Pan head screw
Grip
Hook assembly
(optional accessory)
M5x18 Pan head
screw
Cover complete
Spacer
Safety cover
1R003
Safety cover
Retaining ring S-42
Retaining ring S-42
Tension spring 4
Fig. 7
Fig. 8
DISASSEMBLING
