21
Confirm the midway filament change
operation, the machine will unload
filament automatically.
When the machine finish to unload the
filament, a prompt screen will appear.
We need to manually install the new
filament, and then click OK to enter the
loading operation after it is stuck to the
gear of the wire feeder.
It will continue printing after loading.
4.5.3
Temperature, printing speed and nozzle fan adjustment
The machine can be set again if it
finds that the temperature set in Cura
slice software is unsuitable for the
current printing or forgot to turn off the
nozzle fan when printing ABS before
printing.
In the main interface or the
printed interface, click the icon of
nozzle and hotbed temperature (as
shown in the box) to make the
selection change.
